Vinyl Application Instructions

Thank you for purchasing a With Love From Vegas decal!

Your decal should be applied as soon as possible to prevent application issues.

♥ Clean your project surface with rubbing alcohol or soap and water. Do not use cleaning products such as Windex as it will leave a residue behind. Make sure your surface is clean and dry before beginning application.

♠ Run a squeegee or credit card over your decal to remove any air bubbles that may have formed during shipping.

♣ Peel away the vinyl liner at a 45-degree angle. If the vinyl does not separate from the liner, lay the tape back down and firmly burnish the transfer tape onto the vinyl and peel away again.

♥ Place one side of the transfer tape onto the surface and press it down with your applicator. Continue applying the decal in a rolling motion using your applicator to press it down as you go. Once applied, burnish the transfer tape onto the surface starting in the center and moving out toward the edges. This will work out any air bubbles that formed during application.

♠ Once your decal has been firmly and thoroughly burnished onto your project surface, peel the transfer tape away from the vinyl at a 45-degree angle. If the vinyl sticks to the transfer tape, lay the tape back down and burnish again then continue to peel the transfer tape away from the vinyl.

♦ Step back and admire your work!

Please note that a copy of these instructions will be included with every decal order.